PP High Flow Filter Cartridge For Pharmaceutical Water Prefiltration 5μM 40"
Description of Pharmaceutical water prefiltration
WECHANG high flow filter cartridge are coreless, single open-ended filters that offer high filtration efficiency. These filters have a large diameter and laid over pleated cartridge with an inside-to-outside flow pattern that prevents debris from escaping the filter. The high flow rate at 1900 lpm or 500 gpm for a 60-inch length element allows for fewer cartridge change-outs.
Application of Pharmaceutical water prefiltration
- CMP Filtration;
- Liquid prefiltration;
- Sewage filtration;
- Security filtration;
- Clarification filtration.
Features of Pharmaceutical water prefiltration
- Easy to install, saving, less filter element replacement, help customers save labor costs;
- Filtration efficiency up to 99.8%.
- Made entirely of polypropylene material, without any adhesives, and with low leaching;
- Large area filtration with high throughput;
- Core free structure;
- Inside-to-outside flow pattern that traps contaminant inside the element, thus preventing polluting the treated water during the cartridge change-out;
- High flow rate & long life;
- High pollution tolerance.
- 100,000-level clean room manufactured;
- 100% integrity test for every filter cartridge before delivery.
Operating Characteristic of Pharmaceutical water prefiltration
| Outer Diameter | 6”/158mm |
| Length | 20”/508mm 40”/1016mm 60”/1524mm |
| Pore Size | 0.7, 1.5, 10, 20, 30, 70, 100μm |
| Max. Operation Temperature | 80℃ |
| Max. Operation Pressure | Forward direction: 0.58 MPa(25±2℃) 0.24MPa(80±2℃) *It not recommend for reverse use |
| Filtration Areas | 20”≥6m²; 40”≥12m²; 60”≥18m². |
| Integrity Testing | Bubble point≥60KPa 50KPa pressure, diffusion flow＜10 ml/min Anhydrous ethanol was used as the wetting solution at 25°C, and compressed air was used to test the bubble point values against the diffusion flows. |
| Sterilization | 30 times (121.4℃,30 min offline high-pressure steam sterilization) |
| Bacterial Retention Capacity | Minimum retention rate 107 CFU/cm2 The product was tested against Serratia marcescens (ATCC14756) using ASTM F838 method. |
| Extractable Substance | ＜50 mg/m2 After high-pressure steam sterilization(121.4℃,60 min), 25℃±2℃ immersing in pure water for 24h |
| Biosafety | The endotoxin level＜0.25 EU/ml, and the extraction solution has no acute toxicity |
| Cleanliness | No fibers or other visible foreign objects were detected in the filtered liquid. *Lamp test according to the Chinese Pharmacopoeia 2020 edition <0904> |
Flow Rate of Pharmaceutical water prefiltration
Material of Structure of Pharmaceutical water prefiltration
| Filter Media | Polypropylene |
| Deflector Layer | Polypropylene |
| Enclosures/Ports | High Temperature Resistance Polypropylene |
| Adapter | Polypropylene |
| Seals | Silicone/EPDM |
Naming Regulations of Pharmaceutical water prefiltration
| WF | PL | P | 0022 | 40 | | S |
| Trademark | Form | Filtration Materials | Accuracy | length | Adapter | O ring |
| WECHANFIB | PLEATED | P PP | 0070 0.7μm | 20 20” | | S Silastic |
| | | Blank EVOH | 0150 1.5μm | 40 40” | | E EPDM |
| | | | 1000 10μm | 60 60” | | V FKM |
| | | | 2000 20μm | | | T PTFE |
| | | | 3000 30μm | | | |
| | | | 7000 70μm | | | |
| | | | 0000 100μm | | | |
| Wechange Pleated Filter Cartridge Products List |
| Membrane Material | Type No. | Application | Pore Size | Diameter | Length | Adaptor |
| μm | mm | inch |
| PP/PO | WF-HF-P-0070-20-* | Security Filtration, Clarification Filtration, Liquid Pre Filtration | 0.7 | 158 | 20" | |
| PP/PO | WF-HF-P-0070-40-* | 0.7 | 158 | 40" | |
| PP/PO | WF-HF-P-0070-60-* | 0.7 | 158 | 60" | |
| PP/PO | WF-HF-P-0150-20-* | 1.5 | 158 | 20" | |
| PP/PO | WF-HF-P-0150-40-* | 1.5 | 158 | 40" | |
| PP/PO | WF-HF-P-0150-60-* | 1.5 | 158 | 60" | |
| PP/PO | WF-HF-P-1000-20-* | 10 | 158 | 20" | |
| PP/PO | WF-HF-P-1000-40-* | 10 | 158 | 40" | |
| PP/PO | WF-HF-P-1000-60-* | 10 | 158 | 60" | |
| PP/PO | WF-HF-P-2000-20-* | 20 | 158 | 20" | |
| PP/PO | WF-HF-P-2000-40-* | 20 | 158 | 40" | |
| PP/PO | WF-HF-P-2000-60-* | 20 | 158 | 60" | |
| PP/PO | WF-HF-P-3000-20-* | 30 | 158 | 20" | |
| PP/PO | WF-HF-P-3000-40-* | 30 | 158 | 40" | |
| PP/PO | WF-HF-P-3000-60-* | 30 | 158 | 60" | |
| PP/PO | WF-HF-P-7000-20-* | 70 | 158 | 20" | |
| PP/PO | WF-HF-P-7000-40-* | 70 | 158 | 40" | |
| PP/PO | WF-HF-P-7000-60-* | 70 | 158 | 60" | |
| PP/PO | WF-HF-P-0000-20-* | 100 | 158 | 20" | |
| PP/PO | WF-HF-P-0000-40-* | 100 | 158 | 40" | |
| PP/PO | WF-HF-P-0000-60-* | 100 | 158 | 60" | |
General Description of Pharmaceutical water prefiltration :
WechanFIB ultra large flow filter is a large-diameter, non center rod, single opening filter with a unique design of inward and outward flow direction, with a filtration area of up to 6m ²/20 inches. At a flow rate of 40 inches, it can reach over 60t/h, achieving high flux and long lifespan. Using PP membrane material and unique multi-layer nanofiber folding technology, a gradient filtration structure is achieved, increasing the space for pollutant absorption and greatly extending the service life, thereby reducing replacement frequency and system costs.
Application of Pharmaceutical water prefiltration:
1. Pre filtration of pharmaceutical wastewater
2,Security filtration of RO
3,Beer and beverage clarifying filtration
Features and Benefits of Pharmaceutical water prefiltration:
* Large area filtration with high throughput
* Core free structure
* The fluid flows from the inside out to ensure pollutants are carried inside the single pass structure of the filter
* The production environment is a 100,000-level clean workshop
* Strict quality control system, complete production process flow;
* Short delivery period;
* Flexible payment method: T/T, L/C, West Union, Paypal;
* Free technical support;
Performance Specifications of Pharmaceutical water prefiltration:
Dimensions(nominal):
| OD | 158mm |
| Length | 40"(1016mm) |
Material of Construction:
| Filter Media | Deflector layer | port | Enclosures/Ports | Seals Material |
| Polypropylene | Polypropylene | Polypropylene | Polypropylene | Silastic/EPDM |
Beer Clarification Filter Cartridge Performance:
| Maximum operation temperature | 80℃ |
| Maximum operation pressure | Forward direction :0.5 MPa(25±2℃) 0.24MPa(80±2℃) It not recommend for reverse use |
| Filtration areas | ≥0.68 m²/ 10 inch ≥2.04 m²/ 30 inch |
| Sterilization | 30 times(121.4℃,30 min offline high-pressure steam sterilization) |
| Extractable substance | ＜50 mg/m2 After high-pressure steam sterilization(121.4℃,60 min),25℃±2℃ immersing in pure water for 24h |
| Biosafety | The endotoxin level＜0.25 EU/ml, and the extraction solution has no acute toxicity |
| Cleanliness | No fibers or other visible foreign objects were detected in the filtered liquid |
Product Tags:
|
|
PP High Flow Filter Cartridge For Pharmaceutical Water Prefiltration 5μM 40" Images
|
